Hi,
this is probably a fairly basic question for some people used with
switching but I'm having a lot of trouble on finding documentation
answering my questions.
Anyways here's my question. We're looking at implementing a
Catalyst switch on our LAN and create VLANs. However, there are two
subnets on that network we'd like to put on the switch (let's say network
192.9.200.0 and 192.9.204.0) since we'd like to avoid readdressing. How
can I route between these two subnets?
Will the Catalyst be able to do that for me? Or do I have to use a
separate router.
If it's not available right now, when should it be?
Thank you very much,
Pierre-Etienne Chartier
>+=+=+=+=+=+=+=+=+=+=+=++=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+==+=<
> If there was an information revolution, it's over: <
> information won. <
> -Diana Lady Dougan <
>--------------------------------------------------------------------<
>Pierre-Etienne Chartier <
>Systems Analyst, Logibro, inc. <
>+=+=+=+=+=+=+=+=+=+=+=+=++=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+<
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT