<html>
<body>
Hi Ricky,<br><br>
I'm not 100% sure what you're saying here, so a few questions;<br><br>
You're an ISP, or and end user? (Because the ISP will have to set up your
account for 'MS Callback')<br><br>
If callback is applied to your user profile (via RADIUS) at the ISP end,
then one of two things will happen;<br>
1: ISP hard codes your phone number in their database, and when you dial
and authenticate, Windows will disconnect automatically, and then a box
will sit in the middle of the screen saying something like 'Waiting for
Callback'.<br><br>
2: ISP allows 'MS Callback' but doesn't allocate a phone number. Again,
your PC will dial, authenticate etc and then a pop-up box will appear on
your screen asking for your the callback phone number.<br><br>
If you are hitting cancel at any time during the dialup you will make
Windows abort the dialling completely, and you will end up with no
connection...<br><br>
Let me know if this helps, and if you have any more questions<br><br>
Cheers,<br>
Mike<br><br>
At 09:35 AM Thursday 10/07/2003 +0200, Ricky Magalhaes wrote:<br><br>
<blockquote type=cite class=cite cite><font face="arial" size=2>Hi
Mike,<br>
</font><br>
<font face="arial" size=2> <br>
</font><br>
<font face="arial" size=2>I was searching on the internet and saw that
you have a level of good understanding when it comes to IAS RADIUS and
Cisco compatibility. When I dial in to the Cisco box it tries to call me
back when I press cancel, hoping that I will just connect onto the
network and it will not disconnect me it disconnects me.<br>
</font><br>
<font face="arial" size=2> <br>
</font><br>
<font face="arial" size=2>I hope you can help me with this<br>
</font><br>
<font face="arial" size=2> <br>
</font><br>
<font face="arial" size=2>RM<br>
</font></blockquote>
<x-sigsep><p></x-sigsep>
Cisco Systems,<br>
Customer Support Engineer,<br>
Asia Pacific Technical Assistance Centre,<br>
Sydney, Australia<br>
Ph: (+61 2) 8446 6044<br>
</body>
</html>