[nsp] 6509 going to rommon

[Simon Hamilton-Wilkes]

That's exactly what I'm after.

What version are you running ?

On 12.1.13E4 I don't have the vlans in the config.

I checked just in case I was going mad...

Simon

-----Original Message-----
From: sthaug at nethelp.no [mailto:sthaug at nethelp.no]
Sent: Monday, April 28, 2003 12:15 AM
To: simon at jettis.com
Cc: cisco-nsp at puck.nether.net
Subject: RE: [nsp] 6509 going to rommon


> This is one of my peeves with IOS on the 6500.  We run
> RPR+ so use global config mode rather than VLAN database
> mode for configuration, it's annoying to see the commands 
> not end up in the config where they can be seen, and easily
> archived.

We run RPR+ and global config mode too, and the VLAN info certainly
ends up in the config where it can be seen:

redundancy
 mode rpr-plus
 main-cpu
  auto-sync running-config
  auto-sync standard
!
vlan dot1q tag native
!
vlan 5
 name ...
!
vlan 6
 name ...
!
vlan 7
 name ...
!

Or isn't this what you meant?

Steinar Haug, Nethelp consulting, sthaug at nethelp.no