[nsp] SAA

[Bruce Pinsky]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

ThomaS wrote:

| Hello,
|
| I'm trying to find some useful documentation on how to extract SAA data from
| an IOS router using SNMP.
|
| I'm just trying to measure latency across a single hop using the ipIcmpEcho
| type. I'm having trouble tracking down how exactly I can read the return
| time for each ping. All the CCO docs have examples for the other types, but
| not this one. The show rtr collection-statistics command doesn't seem to
| show any response time either.
|
| rtr responder
| !
| rtr 1
|  type echo protocol ipIcmpEcho 192.168.1.1 source-ipaddr 192.168.1.254
|  frequency 10
| rtr schedule 1 life forever start-time now
|
| Any suggestions?

Have you looked at any of the following MIBS and whitepaper:

ftp://ftp.cisco.com/pub/mibs/v1/CISCO-RTTMON-MIB-V1SMI.my
ftp://ftp.cisco.com/pub/mibs/v1/CISCO-SAA-APM-MIB-V1SMI.my
http://www.cisco.com/en/US/partner/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml

There are specific examples in the whitepaper.

=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (MingW32)

iD8DBQE/1QBDE1XcgMgrtyYRAnpWAJ9puOy5MD63fnkS1kew5UxmEYAEpgCg3yuW
TQLebXpf7VID0d/bNxIwpuk=
=JkOf
-----END PGP SIGNATURE-----