[Re: [Re: [nsp] 2950 & vlans]]

[sthaug at nethelp.no]

> IIRC, the 2950 supports only one instance of the MAC address across the
> entire switch.  With Sun that can cause problems since they use the same
> MAC across all interfaces unless you use an LAA.  Even on my SPARC with 3
> physical interfaces, all have the same MAC.

It would be useful if Cisco had a Web page which documented on what
platforms this restriction applies. I know I have used the same MAC
address in different VLANs on both 3550 and 6500/7600.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no