[nsp] 12.2(13)T1 PPTP Broken?

[Oliver Boehmer (oboehmer)]

Hi Dan,

looks like CSCdz47290 (PPTP fast/process switching broken when CEF is
enabled globally). Please try turning off CEF globally ("no ip cef") as
possible workaround in your configuration (perf-impact needs to be
evaluated).

	oli

> -----Original Message-----
> From: Dan Armstrong [mailto:dan at beanfield.com] 
> Sent: Dienstag, 11. Februar 2003 15:18
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] 12.2(13)T1 PPTP Broken?
> 
> 
> Hello,
> 
> We just upgraded one of our 7206s that is being used as an LNS router.
> It does L2TP termination for ILEC DSL, and PPTP VPN 
> termination.  It was
> running 12.2(8)T5, and everything seemed to work.  When we 
> upgraded, all
> of the PPTP VPNs broke, L2TP seems to be fine. Does anybody konw if a
> default changed, or is that part of the VPDN just broken in 
> 12.2(13)T1?
> 
> Thanks.
> . . .
> 
> interface Virtual-Template10
>  description PPTP
>  no ip address
>  ip access-group 150 in
>  ip mtu 1428
>  no ip route-cache cef
>  ppp encrypt mppe auto required
>  ppp authentication ms-chap
> 
> interface Virtual-Template100
>  description Nexxia L2TP GAS
>  no ip address
>  ip access-group 150 in
>  ip mtu 1492
>  no ip route-cache cef
>  ip mroute-cache
>  ppp authentication chap pap
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>