[nsp] 75xx with VIP2-50 and PA-GE running MPLS VPN's?
Oleksandr Pantus
alx at vsmu.vinnica.ua
Thu Feb 27 20:00:51 EST 2003
Hello !
On Thu, 27 Feb 2003, Dennis Dubbelman wrote:
> There are two VIP2-50 with each one PA-GE modules inserted.
> But I can't see the difference between a real GEIP ?
So do I. Cisco thinks that there are two GEIP, not VIP2-50 with PA-GE. But
our attempts here to fly with such configuration have failed. Do you use
any _special_ VIP2-50 as
http://www.cisco.com/en/US/products/hw/routers/ps359/prod_module_installation_guide09186a00800fd116.html
states that PA-GE is not supported by regular VIP2-50.
>
> -------------------------
>
>
> per2.asd-hp.nl#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) RSP Software (RSP-PV-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Fri 17-Jan-03 14:52 by nmasa
> Image text-base: 0x40010DD8, data-base: 0x411BA000
>
> ROM: System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(11)T2, RELEASE SOFTWARE (fc1)
>
> per2.asd-hp.nl uptime is 2 minutes
> System returned to ROM by reload at 18:29:36 NL Thu Feb 27 2003
> System image file is "slot1:rsp-pv-mz.120-24.S.bin"
>
> cisco RSP4 (R5000) processor with 262208K/2072K bytes of memory.
> R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
> Last reset from power-on
> G.703/E1 software, Version 1.0.
> G.703/JT2 software, Version 1.0.
> X.25 software, Version 3.0.0.
> Chassis Interface.
> 2 GEIP controllers (2 GigabitEthernet).
> 1 FEIP controller (1 FastEthernet).
> 1 FastEthernet/IEEE 802.3 interface(s)
> 2 GigabitEthernet/IEEE 802.3 interface(s)
> 123K bytes of non-volatile configuration memory.
>
> 16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> 20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
> 8192K bytes of Flash internal SIMM (Sector size 256K).
>
> Slave in slot 7 is running Cisco Internetwork Operating System Software
> IOS (tm) RSP Software (RSP-PV-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Fri 17-Jan-03 14:52 by nmasa
> Slave: Loaded from system
> Slave: cisco RSP4 (R5000) processor with 262144K bytes of memory.
>
> Configuration register is 0x2102
>
> per2.asd-hp.nl#
>
> per2.asd-hp.nl#sh diagbus 0
> Slot 0:
> Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0
> Microcode Status 0x4
> Master Enable, LED, WCS Loaded
> Board is analyzed
> Pending I/O Status: None
> EEPROM format version 1
> GEIP controller, FRU: GEIP=, HW rev 2.03, board revision A0
> Serial number: 18608348 Part number: 73-2167-06
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 21 02 03 01 1B F0 DC 49 08 77 06 00 00 00 00
> 0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x427C (00:02:28 ago)
>
> Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
>
> PA Bay 0 Information:
> Gigabit-Ethernet PA, 1 ports, FRU: PA-GE=
> EEPROM format version 1
> HW rev 1.00, Board revision A1
> Serial number: 18619036 Part number: 73-3144-03
>
> --Boot log begin--
>
> Cisco Internetwork Operating System Software
> IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Fri 17-Jan-03 15:15 by nmasa
> Image text-base: 0x60010BB8, data-base: 0x60460000
>
>
> --Boot log end--
>
> per2.asd-hp.nl#sh diagbus 1
> Slot 1:
> Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0
> Microcode Status 0x4
> Master Enable, LED, WCS Loaded
> Board is analyzed
> Pending I/O Status: None
> EEPROM format version 1
> GEIP controller, FRU: GEIP=, HW rev 2.03, board revision A0
> Serial number: 18616506 Part number: 73-2167-06
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 21 02 03 01 1C 10 BA 49 08 77 06 00 00 00 00
> 0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x427C (00:03:13 ago)
>
> Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
>
> PA Bay 0 Information:
> Gigabit-Ethernet PA, 1 ports, FRU: PA-GE=
> EEPROM format version 1
> HW rev 1.00, Board revision A1
> Serial number: 18598977 Part number: 73-3144-03
>
> --Boot log begin--
>
> Cisco Internetwork Operating System Software
> IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(24)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Fri 17-Jan-03 15:15 by nmasa
> Image text-base: 0x60010BB8, data-base: 0x60460000
>
>
> --Boot log end--
>
> per2.asd-hp.nl#
>
> -----Original Message-----
> From: Oleksandr Pantus [mailto:alx at vsmu.vinnica.ua]
> Sent: Thursday, February 27, 2003 6:30 PM
> To: Dennis Dubbelman
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] 75xx with VIP2-50 and PA-GE running MPLS VPN's?
>
>
> Hello !
>
> On Thu, 27 Feb 2003, Dennis Dubbelman wrote:
> > We've got a 7513 with a VIP2-50 and a PA-GE inserted into it ?!?!
>
> Would you be so kind to inform what RSP and IOS do you use for that ?
> AFAIK, PA-GE is not supported on VIP2-50.
>
>
--
S/Y,
Alexander, MD, nic-hdl: AJP1-UANIC
More information about the cisco-nsp
mailing list