[nsp] voip question

[Joshua Smith]

hello all

another voip related question - i have a 5350 registering to a 3640 
gatekeeper - the only dial-peer configured to use the gatekeeper is an
outbound peer.  my problem is an inbound peer, when the gateway is 
registered, this one inbound peer will not accept calls (i have two other
inbound peers that seem to work fine) - if i unregister the gateway, calls
come in this peer just fine.

gateway configs:
(this peer is the problem)
dial-peer voice 11190802 voip
incoming called-number 802T
codec g729r8 bytes 40

dial-peer voice 5 pots
destination-pattern 802T
port 2:D
no register e164

(this peer works)
dial-peer voice 11257006 pots
destination-pattern 7006T
port 0:D


gatekeeper:
 zone local FusionGK nyc1.ftign.net 66.151.208.241
 zone remote QGK-Toronto qiik.com 207.164.255.70 1719
 zone prefix QGK-Toronto 254*
 lrq forward-queries
 no use-proxy FusionGK default inbound-to terminal
 no use-proxy FusionGK default outbound-from terminal
 shutdown

i had a h225 asn1 debug that showed the calls but my laptop crashed - if 
someone needs them, i can debug some calls - the messages looked the same,
except the calls while registered would show release complete after 'user
info' and unregistered would go to 'call proceding'

thanks

joshua


"Walk with me through the Universe,
 And along the way see how all of us are Connected.
 Feast the eyes of your Soul,
 On the Love that abounds.
 In all places at once, seemingly endless,
 Like your own existence."
     - Stephen Hawking -