[nsp] 12.0(25)S on 7500 platform

[Raymond, Steven]

So far, 12.0(25)S works great..... in the lab, of course.  :)
Actually, 1 less important production router is "testing" it at this moment.
Will report back with the good & the bad.
Some points observed is that vs. 12.0(21)S5 or so the CPU utilization (w/
dCEF) is nearly double.  RSP would idle at about 6-8% with 21 and now hang
around 11-15% with (25).  Not a big deal.  
Found that (25) RSP memory consumption is about 20MB more than (21), now
free memory is hovering around 100MB on 256MB RSP4s.  128MB VIP2-50s still
have over 75MB free.
Regards


-----Original Message-----
From: Tom Scholl [mailto:tscholl at ameritech.net]
Sent: Tuesday, May 06, 2003 8:11 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] 12.0(25)S on 7500 platform


Has anyone had success with 25S on the 7500 platform? I know in
21S to 24S there has been a lot of talk of issues with the counter bugs.
I heard many of these were resolved in 25S and was curious if anyone
has had any luck with 25S.



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/