[nsp] 6509 Logging

[Sorin CONSTANTINESCU]

Hi,

Are you sure you didn't enable "terminal monitor"? You can check this on
the first page of "show logging".

Rieman, Jeff said:
> I have our 6509 logging some ACL violations to a syslog server but it also
> displays it to the console when I telnet in.  This makes it nearly
> impossible to work on the box.  Is there a way to set the logging up so it
> goes to the syslog server but does not get displayed on the screen when
> you
> telnet in?
>
> Thanks!
>
> Jeff
>
> ===================================
> Jeff Rieman
> Network Manager
> Ohio Northern University
> Office: 419-772-2497
> Cell:    419-302-1271
> ===================================
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


-- 
Sorin CONSTANTINESCU
adonay at dumnez.eu.org
Linux Registered User #222086