[c-nsp] Matching all MPLS traffic for a class map

Temkin, David temkin at sig.com
Tue Aug 3 08:53:33 EDT 2004


I'm trying to match all MPLS traffic using a class map, without setting
experimental bits.  I'm not finding anything like "match protocol mpls"
or any easy way to do this.  My one thought was to use Ethertype, but
this is for traffic that's leaving out a DS-3, so that didn't seem like
it would work.  Any ideas would be appreciated...

IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments.  Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited.  Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument.  Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses.




More information about the cisco-nsp mailing list