[nsp] AToM (on 7600 w/ SUP720) : summary

[Alexey G Misurenko]

> That is correct - if you install a DFC3A card in a PFC3B-XL system, the line card remains powered down.
> 
> Not sure what you mean, "then how about 'high avaibility solution'". What exactly is the question?
> 
> Tim

 Tim, if you read second line off [snip] you can see 'modules must be installed at bootup'.
For me this mean that i must reboot(reload) chassis  if I insert to it DFC3A-equipped
module.

> >
> > * With a PFC3BXL and no DFC3A-equipped switching modules installed at bootup,
> >   any DFC3A-equipped switching module installed after bootup remain powered down.
> > * To use DFC3A-equipped switching modules with a PFC3BXL, the DFC3A-equipped switching
> >   modules must be installed at bootup.
> >
> >And now question. If I correctly understand this too lines
> >I can't insert DFC3A-equipped switching modules to chassis
> >any time and start use. Is it true? and if yes then how about
> >'high avaibility solution'?
> 
> 

-- 
WBR,   Alexey G Misurenko ( MAG-RIPE | MMAGG-RIPN )
CTO of Caravan ISP            http://www.caravan.ru
Phone: +7 095 3632252         Cell:  +7 903 7450163