[nsp] OC3 interfaces for 7xxx vs. other OC12 transport options

[Mikael Abrahamsson]

On Mon, 12 Jul 2004, Clayton Zekelman wrote:

> If you're going to be terminating DS1 services from the OC3, then you'll
> likely need a SONET MUX of some sort.  AFAIK, Cisco does not have an OC3
> interface that supports DS1 channelization on the 7XXX series router.  
> The only OC3 interfaces I know of are the Port Adapters that support
> OC3c (concatenated) services such as Packet over Sonet or ATM.

PA-MC-STM-1SMI or MM.

Or does this only work on SDH and not on SONET?

-- 
Mikael Abrahamsson    email: swmike at swm.pp.se