[c-nsp] Etherchannel & port-channel

Richard J. Sears rsears at adnc.com
Tue Jul 27 14:24:47 EDT 2004


I have a 6509 running dual SUP720 engines and need to hand my customer a
2 gig etherchannel connection. I am running IOS only (no Cat OS). However
after configuring the ports, I am seeing something strange in the sh
int:

I show both gig ports in the members section, but I show only 1000Mb/s
as the total etherchannel size:

Does anyone know if this is a bug in the IOS (maybe it will only show a
total of 1000Mb/s) or is there another problem..?

Thanks

AR01#sh int port-channel 101
Port-channel101 is up, line protocol is up (connected)
  Hardware is EtherChannel, address is 00d0.01a6.b000 (bia 00d0.01a6.b000)
  Description: XS EtherChannel Interface (CF1.CGX) [21645]
  Internet address is 202.201.205.101/30
  MTU 1500 bytes, BW 2000000 Kbit, DLY 10 usec, 
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Full-duplex, 1000Mb/s
  input flow-control is off, output flow-control is unsupported 
  Members in this channel: Gi7/1 Gi8/1     
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:01:14, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
--------------SNIP------------------

******************************************
Richard J. Sears
Vice President         
American Digital Network                          
----------------------------------------------------
rsears at adnc.com
http://www.adnc.com
----------------------------------------------------
858.576.4272 - Phone
858.427.2401 - Fax
----------------------------------------------------

I fly because it releases my mind 
from the tyranny of petty things . . 


"Work like you don't need the money, love like you've
never been hurt and dance like you do when nobody's
watching."



More information about the cisco-nsp mailing list