[nsp] 802.3ad Link Aggregation

[Khawaja, Kashif]

Yes, Thanks!
That is what I had it working with last night.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ralph Doncaster
Sent: Thursday, June 17, 2004 7:58 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [nsp] 802.3ad Link Aggregation


Looks like LACP trunking mode 'On' (vs 'Active') is what you want.

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_e
xample09186a0080094470.shtml

"LACP trunking supports four modes of operation, as follows:
On: The link aggregation is forced to be formed without any LACP
negotiation"


Ralph Doncaster, IStop.com president
6042147 Canada Inc.

On Wed, 16 Jun 2004, Khawaja, Kashif wrote:

> Hi,
>
> Can 802.3ad link aggregation be done without using any control 
> protocol i.e. statically on the catalyst 65xx switches?
>
> Thanks!
> Kashif.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/