[nsp] NPE-G1 SODIMM

[Szilard Matyas]

Hi all,

I would like to buy RAM for NPE-G1.
I saw that the NPE-G1 support the 200 Pin DDR SODIMM ECC memory. I 'd like
to buy 2 pcs. 256 Mbyte modul. I found an approved manufacturer Micron.
There are two products that could be good for us.

PART NUMBER MODULE  DENSITY CONFIGURATION  BANDWIDTH  MEMORY CLOCK  DATA
RATE  CLOCK LATENCY (CL - tRCD - tRP)
MT9VDDT3272PHG-262_    256MB           32 Meg x 72          2.1 GB/s
7.5ns,                  266 MT/s                                2-2-2
MT9VDDT3272PHG-26A_   256MB           32 Meg x 72          2.1 GB/s
7 5ns,                  266 MT/s                                2-3-3

The two models are ECC 200 Pin DDR SODIMM , the only difference is in clock
latency. Is Clock latency count to the NPE-G1 ?

Thanks everybody's response...

Regards,

Szicsu