[nsp] 7600 sup2msfc2 - 12.2(17d)SXB

[Jared Mauch]

On Wed, Mar 10, 2004 at 03:42:15PM +0100, Daniska, Tomas wrote:
> > From: Jared Mauch [mailto:jared at puck.nether.net] 
> > 
> > 	I've been running pre-release versions of this software 
> > for some time to get IPv6 support on the 6500 (sup2, mfsc2).
> > 
> > 	I've had no major problems as a result of it.
> > 
> > 	I am seeing a bit of ISIS inconsistency (in my lab 
> > only) between the 12.2SXB branch and the 12.2S code, but 
> > nothing that is causing any problems.
> > 
> 
> do you run mpls?

	We are not using MPLS, but are using: BGP, MBGP (address-family
multicast), BGPv6 (address-family ipv6 unicast), OSPFv3, OSPF, cef,
dcef (on linecards w/ dfc/pfc).

	We also have 802.1q trunks/termination of metro GE on vlanX
interfaces on the boxes as well.

	- Jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.