[nsp] NPE-225 boot code not loading on 7206 NON-VXR

[Spencer Garrett]

> On Thu, May 27, 2004 at 12:09:00PM -0400, Chris Hale wrote:
> > I noticed the boot code on a NPE-225 w/ IO-2FE won't load, and we have to
> > use rommon to load the router every time.  Is there a free upgrade to get
> > this old version of the NPE-225 swapped out to a newer firmware version?
> 
> > Any ideas?  Also - what's the config-register supposed to be set at if I
> > want it to look at the config for the location of the image to load?
> > 
> > I have 0x2101 right now.

As I recall, setting the last digit of the confreg to 1 tells the router
to stop in the rommon on boot.  Try setting it to 2 (eg - 0x2102 which is
the standard value).

Spencer