[c-nsp] 7500 / Images w/o ethernet support?

[Sorin CONSTANTINESCU]

Hi,

Hardware-Software Compatibility Matrix says that you can use
rsp-pv-mz.121-23.E2.bin for your hardware, but the Feature Navigator
shows only 12.2 and 12.3 as having IPV6 support for 7500.


On Sat, 20 Nov 2004 15:33:44 -0500 (EST), Tuc <tuc at ttsg.com> wrote:
> > On Sat, Nov 20, 2004 at 03:07:20PM -0500, Tuc wrote:
> > >     You'll have to excuse me. I've never worked on a 7500, know nothing
> > > about them, trying to help a friend who knows even less.
> > [..]
> > >     Is it possible for an image to not have the support for the ethernets?
> > > If so, what image does he really need?
> >
> > This sounds as if 12.2(25)S has problems with VIP2-40 boards - those
> > are also missing from the "show version".
> >
>        :-/ That sucks.
> >
> > I've seen mis-built images that lack essential things before (like some
> > 11.2P that had no support for the onboard FastEthernet on 7200 IO-boards),
> > but I've neve heard of an image that purposely lacked ethernet support.
> > 
>        Does anyone know the most current that would run on a VIP2-40 and
> has POS and can do IPV6?? (And have it READILY available??)
> 
>                Thanks, Tuc/TTSG Internet Services, Inc.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


-- 
Sorin CONSTANTINESCU
consta at gmail.com
Linux Registered User #222086