[c-nsp] VPDN and Radius Problem

[Dennis Peng]

CSCdx40593. It is fixed in 12.2(13)T or later.

Dennis

M.Palis [security at cytanet.com.cy] wrote:
> Hello all
> 
> I am trying to configure VPDN connections but I am facing some problems with
> radius I think... I dial using the format test1 at vpn. The LAC establishes
> connection with the LNS, the LNS removes the @vpn and replaces the @vpn with
> spaces and sends the user name to the Radius. as shown below from debug.
> .Nov 23 10:59:45 EET: RADIUS:  User-Name           [1]   11  "test1    "
> 
> Problem is that I am getting authentication failure because radius does not
> recognise the username followed by spaces. Is their a way or a command to
> eliminate the spaces? In case I dial with out the @vpn (e.g via windows vpn
> client) authentication is OK
> 
> 
> Your help will be appreciated.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/