[c-nsp] 2099/tcp (h2250-annex-g)

[Church, Chuck]

Could this be a high reverse telnet line?  Not sure what numbers they
start at on a 7200, but that'd be the 98th line on a 2500.  'Sh line'
should tell you... 


Chuck Church
Lead Design Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services - Design & Implementation
1210 N. Parker Rd.
Greenville, SC 29609
Home office: 864-335-9473
Cell: 703-819-3495
cchurch at netcogov.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Roy
Sent: Friday, August 05, 2005 3:42 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 2099/tcp (h2250-annex-g)

Hi List,

Is there a way I can shut the service running on tcp port 2099 on my
router? I've already tried the ff commands:

'no gateway'
'no voice service [voip | vofr | voatm | pots]'
'gatekeeper <cr> shut'
'no service udp-small-servers'
'no service tcp-small-servers'

And.. No luck. :)

I'm running: "IOS (tm) 7200 Software (C7200-JS-M), Version 12.3(1a)".

Thanks,

Roy

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/