[c-nsp] GBIC error message, any clue? (cpd_port_enable: port 25 xcvr_enable_link: FALSE)

[Palis Michael]

Actualy Cisco Does recommend the use of nonegotiate to all GBIG interfaces.
We had this problem before and we replace the GBIGs after talking with TAC.
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Alexander Koch
Sent: Saturday, November 26, 2005 12:42 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] GBIC error message,any clue? (cpd_port_enable: port 25
xcvr_enable_link: FALSE)

The GBIC on this 2950 is killing me. Saying shut/ no shut
gets it into error-disabled immediately. I had to say
'speed nonegotiate' to bring this one up. Anyone seen these
scary messages before?

Regards,
Alexander

Nov 26 10:43:33: %LINEPROTO-5-UPDOWN: Line protocol on
Interface GigabitEthernet0/2, changed state to up
Nov 26 10:43:35: %LINEPROTO-5-UPDOWN: Line protocol on
Interface GigabitEthernet0/2, changed state to down
Nov 26 10:43:36: %PM-4-ERR_DISABLE: link-flap error detected
on Gi0/2, putting Gi0/2 in err-disable statecpd_port_enable:
port 25 xcvr_enable_link: FALSE
Nov 26 10:43:44: %SYS-5-CONFIG_I: Configured from console by
vty0 (213.200.88.76)
Nov 26 10:43:46: %PM-4-ERR_DISABLE: link-flap error detected
on Gi0/2, putting Gi0/2 in err-disable state
Nov 26 10:47:03: %LINK-5-CHANGED: Interface
GigabitEthernet0/2, changed state to administratively
downcpd_port_enable: port 25 xcvr_enable_link: FALSE

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/