[c-nsp] Configuring Ethernet Channel on a Cisco 7513

[lists at hojmark.org]

>> AFAIK, the 3550's default etherchannel behavior is to load
>> share the member interfaces based on packet source IP.

> IIRC you have a choice on the switch of per-mac source or
> destination balancing.

You can chose src-mac og dst-mac on the 3550, and src-mac is
default.

However, when src-mac is configured, the switch will load-balance
*routed* IP traffic based on source *and* destination IP address,
which may not be extremely intuitive, given the name of the CLI
argument.

-A