[c-nsp] Remove administration group on Cat6509

[Joe Shen]

Yes, I tried but after exec that command, and "sh run"

the configuration line:

set port channel 8/19 119
set port channle 8/10-12 120

is still there.

Joe

 --- "Stork, D.H. (Duncan)" <d.h.stork at minlnv.nl>
µÄÕýÎÄ£º
> Did you try "set port channel 8/19 mode auto" ???
> 
> -----Oorspronkelijk bericht-----
> Van: Joe Shen [mailto:sj_hznm at yahoo.com.cn]
> Verzonden: woensdag 5 januari 2005 09:58
> Aan: cisco-nsp at puck.nether.net
> Onderwerp: [c-nsp] Remove administration group on
> Cat6509
> 
> 
> Hi,
> 
> I met a question on configing Catalyst6509.
> 
> The CatOS version is 6.3. 
> 
> I want to remove some administration group from L2
> configuration.
> 
> e.g. there is configuration like:
> 
> set port channel 8/19 119
> set port channle 8/10-12 120
> 
> how can I remove them ? 
> 
> I do "set port channel 8/19 mode off" but the
> configuration line is still there.
> 
> Joe
> 
>
_________________________________________________________
> Do You Yahoo!?
> ×¢²áÊÀ½çÒ»Á÷Æ·ÖʵÄÑÅ»¢Ãâ·ÑµçÓÊ
>
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
>  

_________________________________________________________
Do You Yahoo!?
×¢²áÊÀ½çÒ»Á÷Æ·ÖʵÄÑÅ»¢Ãâ·ÑµçÓÊ
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/