[c-nsp] Re: POSIP and PA-POS differences

[Ram S]

As far as i know posip's not suppport dcef switching 
but PA-POS-OC3 would support dcef switching.

--- Jon Lewis <jlewis at lewis.org> wrote:

> On Wed, 19 Jan 2005, Bill Wichers wrote:
> 
> > This link:
> >
> >
>
http://www.cisco.com/warp/public/cc/pd/ifaa/ifpz/prodlit/1046_pp.htm
> >
> > Seems to indicate that there are few real
> differences between the older
> > POSIP-OC3-50SM blades for the 7500 and using a
> PA-POS-OC3SML in a VIP2-50.
> 
> As far as the router is concerned, the POSIP
> actually does show up as a
> VIP2-50 with a PA-POSDW-SM in PA bay 0.  I haven't
> filled one up yet, but
> I have seen 80-90mbit/s come in on one and go out
> through another POSIP
> blade in a 7513.
> 
>
----------------------------------------------------------------------
>  Jon Lewis                   |  I route
>  Senior Network Engineer     |  therefore you are
>  Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP
> public key_________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com