[c-nsp] 6509 Boot Problem

Paul Stewart pauls at nexicom.net
Thu Jan 20 13:47:25 EST 2005


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Unrelated to my last post... seems I'm not having a great 6509 day today :)

I'm booting up a brand new 6509 and getting the following errors:

IOS (tm) c6s2p2_sp Software (c6s2p2_sp-PK9SV-M), Version 12.2(18)SXD2,
RELEASE S
OFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Thu 21-Oct-04 23:43 by hqluong
00:00:56: %C6KENV-SP-4-FANVERCHK: Power-supply 1 inserted is only
compatible wit
h Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:00:56: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:00:56: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:00:56: %C6KENV-SP-4-FANVERCHK: Power-supply 2 inserted is only
compatible wit
h Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:00:56: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:08: %C6KERRDETECT-SP-4-SWBUSSTALL: The switching bus is
experiencing stall
~ for 3 seconds
00:01:31: %ONLINE-SP-6-INITFAIL: Module 1: Failed to synchronize Port asic
....
....
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x43f3b404
PC = 0x401981ec, Cause = 0x1820, Status Reg = 0x34018002

System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
*** Mistral Interrupt on line 2 ***
PC = 0xbfc1234c, Cause = 0x1000, Status Reg = 0x30419003
ROM Monitor Can Not Recover From Exception
A Board Reset Is Issued
System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 262144 Kbytes of main memory

Autoboot executing command: "boot disk0:c6k222-pk9sv-mz.122-18.SXD2.bin"


Can anyone enlighten me as to the cause of this?  All that's in this
6509 chassis is a Sup2/MSFC2 card .. no line cards yet...

This software version is running in other switches just fine with
exactly the same hardware (plus line cards of course)...

Thanks for your help..

Paul

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)

iD8DBQFB7/y8qMetgU57IuQRAj/wAJ9uDDPLXdUP5DTYK1kwuOi+J7YwSACeMRZr
OZ5I0Ns074V4YM+L8dWO8/E=
=u/0h
-----END PGP SIGNATURE-----


More information about the cisco-nsp mailing list