[c-nsp] E/MPLS enabled gear

[Kristofer Sigurdsson]

> > What about a simple switch, say a Cat2960, with 24 FE ports and two
> > GigE uplinks?  You could plug that into a router, say, 7301, and use a
> > VLAN trunk between.  Then you could do EoMPLS with dot1q subinterfaces
> > on the router.
>
> The 7301 is more expensive than a Sup32-3B...

Oh...okay, what about a used NPE-400 with a GigE PA? :-)

Even a 2851 would work, if they don't need a lot of bandwidth.

-Kristo