[c-nsp] CRC on POS interfaces, 7500

[Tony Li]

It's far safer to use CRC 32 on both ends.  Is there some reason not to?

Tony
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of 
> Kristofer Sigurdsson
> Sent: Thursday, August 17, 2006 1:23 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] CRC on POS interfaces, 7500
> 
> Hello list,
> 
> I'm interconnecting an old 7507, RSP8, VIP4-80, PA-POS, with 
> a provider's
> Juniper router.
> 
> This should be fine, except that the Juniper is set to CRC 
> 16, while the
> Cisco defaults to 32.
> Usually (on the 7600's) I just do a "crc 16", but that 
> doesn't seem to be an
> option on the 7500.
> Am I missing something here?  IOS 12.0(24)S6.
> 
> Thanks,
> Kristo
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>