[c-nsp] DS3 for 2821

Chris,

There is a:

NM-1T3/E3	One port T3/E3 network module

In a 2821 it runs in subrate mode. In my environment the 2821 did a
decent job of pushing 40+ mbit/s, but I had limited services enabled.


On 8/21/06, Christopher J. Wolff <cwolff09 at gmail.com> wrote:
> Is anyone using a non-ATM DS3 with the 2821?  I see there is an NM-1A ATM
> DS3 for the 2821 but not the other.  Thanks in advance.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>