[c-nsp] Disable ARP

[Suchy Daniel]

arp authorized is IMHO proper command for disabling ARP learning on
(sub)interface....

From documentation:
To disable dynamic Address Resolution Protocol (ARP) learning on an
interface, use the arp authorized command in interface configuration
mode. To reenable dynamic ARP learning, use the no form of this command.

Dan

Gert Doering wrote:
> Hi,
> 
> On Fri, Aug 25, 2006 at 10:42:52AM +0200, Suchy Daniel wrote:
>> On my 7301...
>>
>> router1(config)#int gi0/2.100
>> router1(config-subif)#no arp ?
>>   authorized   Only allow internal authorized ARP entry
>>   frame-relay  Enable ARP for a frame relay interface
>>   probe        Set ARP probe parameters
>>   timeout      Set ARP cache timeout
> 
> Doesn't look like you can switch off ARP that way.  That's just to
> clear specific ARP settings.
> 
> gert

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: OpenPGP digital signature
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20060825/092426ca/attachment.bin