[c-nsp] Inserting 6704 card in 6500 causes reboot?

[Ed Butler]

We inserted (very carefully) a 10gig line card into one of our
6500/Sup720 units today. After inserting the card, the router rebooted.
There's nothing in the logs to suggest errors of any kind, the only
noticeable thing is that BGP sessions on a separate 6748 card flapped
before the reboot.

We are running 12.2(18)SXF5.

Has anyone seen something similar before? The most confusing thing is
that we've hot-plugged lots of cards in this unit and other 6500s before
without a problem.

Regards,

Ed Butler
RapidSwitch Ltd
DDI: 020 7106 0731

RapidSwitch Ltd, 5th Floor, Sovereign House, 227 Marsh Wall, London, E14
9SD

This email message is intended only for the addressee(s) and contains
information that may be confidential and/or copyright.  If you are not
the intended recipient please notify the sender by reply email and
immediately delete this email. Use, disclosure or reproduction of this
email by anyone other than the intended recipient(s) is strictly
prohibited. No representation is made that this email or any attachments
are free of viruses. Virus scanning is recommended and is the
responsibility of the recipient.