[c-nsp] Strange GEIP+ Error on 7507

Rodney Dunn rodunn at cisco.com
Sat Jun 24 23:53:16 EDT 2006


Did you swap the memory between the two GEIP+'s or were they totally
unique boards?

If they were totally unique something else is causing the bit to flip in
processor memory of the GEIP+ (which is VIP4-80 based which is why you see
that in the log).

I'd say it's pretty odd that you would get a bit to flip coming from the
RSP and it not be detected to/from the CyBus.

I'm hoping you reused the same memory. :)

On Sat, Jun 24, 2006 at 08:44:23PM -0700, Carlos Sean Kamtha wrote:
> On Sat, Jun 24, 2006 at 11:37:40PM -0400, Rodney Dunn wrote:
> > Please post the error again and a couple from the syslog if you have them.
> > 
> 
> %VIP4-80 RM7000-3-MSG: slot6 VIP-3-PROCMEM_ECC_SINGLEBIT_ERROR: Processor memory ECC single-bit exception addr = 40038000 data = 00B00000
>  
> %VIP4-80 RM7000-3-MSG: slot6 VIP-3-PROCMEM_ECC_SINGLEBIT_ERROR: Processor memory ECC single-bit exception addr = 40038000 data = 37B00000
> 
> %VIP4-80 RM7000-3-MSG: slot6 VIP-3-PROCMEM_ECC_SINGLEBIT_ERROR: Processor memory ECC single-bit exception addr = 40038000 data = CCB00000
> 
> That's pretty much all i have. 
> 
> > If it says ECC it's almost NEVER a software problem.
> > 
> > It's a bit getting flipped somewhere and the ECC correction is detecting and
> > fixing it.
> 
> ah.
> 
> > 
> > If you have replaced the GEIP+ (which has ECC protection) I'd probably swap the
> > RSP and see if it goes away.
> 
> Ok. Would I not also see the same problem with the other GEIP+ I installed
> the same day?
> 
> > 
> > Rodney
> > 
> > On Sat, Jun 24, 2006 at 08:28:55PM -0700, Carlos Sean Kamtha wrote:
> > > On Sat, Jun 24, 2006 at 11:20:39PM -0400, Rodney Dunn wrote:
> > > > Post the message again.
> > > > 
> > > > Please please don't change code unless you have solid proof
> > > > it's a code problem.
> > > > 
> > > > I *thought* he said it was a single bit ECC problem that the
> > > > GEIP+ was detecting. If so it could be coming from anywhere in the
> > > > chassis.
> > > > 
> > > 
> > > Are you suggesting that it could be a chassis problem? Never
> > > had an issue with it until now. The chassis has been full
> > > with VIP2-50s for some time..
> > > 
> > > Carlos.
> > > 
> > > > > > -----END PGP SIGNATURE-----
> > > > > _______________________________________________
> > > > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > > > archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list