[c-nsp] Virtual Router or maybe VRF

[Rodney Dunn]

You can just run vrf's without MPLS enabled.

We call it VRF-lite.

Rodney

On Mon, Jun 26, 2006 at 12:36:16PM -0700, Joseph Jackson wrote:
> Hello All,
> 
> 	I am wanting to use one router (7206 NPE-G1) to provide routing
> for two seprate networks that should not have any communication with
> each other.   I was wondering what the best way to do this would be.  I
> have been looking on cisco.com for info about  VRF but it seems to be
> mostly about MPLS.   Any leads would be helpful.
> 
> 
> Thanks
> 
> Joseph
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/