[c-nsp] L2X: Result code(4): 4: Authorization failure

[Nikolay Pavlov]

Hi, Guys.
I am trying to setup LNS server with l2tp tunnel to bell.ca
But when i am calling with DSL modem i have this error on debug:

Nov  2 13:43:38 206.53.48.10 1216: Nov  2 18:43:38.439: L2X: Result code(4): 4: Authorization failure
Nov  2 13:43:38 206.53.48.10 1217: Nov  2 18:43:38.439:      Error code(6): Vendor specific
Nov  2 13:43:38 206.53.48.10 1218: Nov  2 18:43:38.439:      Optional msg: invalid response to challenge

Here is some additional config information:

This is bell.ca peers

username nexxia1007 password 7 SECRET
username nexxia1008 password 7 SECRET
username nexxia1009 password 7 SECRET

aaa authentication login default local enable
aaa authentication ppp default group radius
aaa authentication ppp vpdn group radius
aaa authorization network default group radius
aaa accounting network default start-stop group radius

vpdn enable
!
vpdn-group 1
! Default L2TP VPDN group
 accept-dialin
  protocol l2tp
  virtual-template 1
 local name Velcom
 l2tp tunnel password 7 SECRET

interface Virtual-Template1
 ip unnumbered FastEthernet0/0
 load-interval 60
 peer default ip address pool default
 ppp multilink

radius-server host x.x.x.x auth-port 1812 acct-port 1813 key 7 SECRET

I am missed something?


-- 
======================================================================  
- Best regards, Nikolay Pavlov. <<<-----------------------------------    
======================================================================