[c-nsp] ADSL on 2621 or 2621XM

[Mathias at TelecityRedbus.com]

Hi Guys,

This is for my home ADSL.
I have a 2621 fa0/0 connected to Linksys ADSL2MUE ADSL2 Modem Ethernet
port. Linksys is setup in bridge mode (forward all login detail and
public IP to attached router). Not sure if I need something else (the
2621 has only the 2 default Fast Ethernet ports.
I can't get interface atm0 on the router. I believe this is where I
configure the PVC or is there any other place on the router to do that?

Not sure if you need this but my ADSL speed is: 8M download / 512K
upload

Regards,
Mathias
This e-mail is intended only for the use of the addressees named above and may be confidential. 
If you are not an addressee you must not use any information contained in nor copy it nor inform any person other than the addressees of its existence or contents.