[c-nsp] Out of VLANs on a 2924XL

[Sam Stickland]

Rick Kunkel wrote:
> <snip>
>
>   
>>> Also, I did temporarily switch one to transparent mode, and all the vlans 
>>> were still there.  Since the thing is a stand-alone now, would it be safe 
>>> to remove them without affecting any of the other switches?
>>>
>>>       
>> I'm reading this as: You switched the mode, but you didn't clear your vlan 
>> database.
>>     
>
> Is there a simple command to clear the vlan database?  Do I even NEED the 
> VLAN database on a VTP transparent switch?
>   
Yes, you need the VLAN database on a transparent switch, this is where 
it stores it information about which VLANs it has configured! You don't 
need it the switch is behaving as a VTP client.

Sam