[c-nsp] Sup 720 question

Rodney Dunn rodunn at cisco.com
Thu Sep 28 12:17:08 EDT 2006


Define "choked the entire switch".

Was your RP cpu pegged?  If so you were punting traffic
for some reason and you need to figure that out first.

Rodney

On Thu, Sep 28, 2006 at 12:13:35PM -0400, Drew Weaver wrote:
>     Does anyone know if the CPU overhead is greater when using the
> On-board sup 720 gig-e as opposed to using a line card? We had an
> incident where 190kpps going over Gig 5/1 (attached to the sup720)
> choked an entire switch.
>  
> Thanks,
> -Drew
>  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list