[c-nsp] AToM ip interworking AAL5->802.1q in 7200/12.2SB , possible?

[David Freedman]

 >Hi david
 >Can you post the show vc details for vc 100 on both the PE ?

 >raj

Sure, here you go:


LAB-PE-1>show mpls l2transport vc 100 detail
Local interface: AT2/0.100 up, line protocol up, ATM AAL5 1/100 up
   MPLS VC type is ATM AAL5, interworking type is IP
   Destination address: 80.168.0.50, VC ID: 100, VC status: up
     Output interface: Fa0/1, imposed label stack {500 130}
     Preferred path: not configured
     Default path: active
     Next hop: 195.157.7.113
   Create time: 09:49:20, last status change time: 09:49:13
   Signaling protocol: LDP, peer 80.168.0.50:0 up
     MPLS VC labels: local 263, remote 130
     Group ID: local 0, remote 0
     MTU: local 1500, remote 1500
     Remote interface description:
   Sequencing: receive disabled, send disabled
   VC statistics:
     packet totals: receive 3, send 0
     byte totals:   receive 252, send 0
     packet drops:  receive 0, seq error 0, send 0


LAB-PE-2>show mpls l2transport vc 100 detail
Local interface: Fa2/0.100 up, line protocol up, Eth VLAN 100 up
   MPLS VC type is Eth VLAN, interworking type is IP
   Destination address: 80.168.0.42, VC ID: 100, VC status: up
     Output interface: Gi0/2, imposed label stack {163 263}
     Preferred path: not configured
     Default path: active
     Next hop: 195.8.68.141
   Create time: 10:20:37, last status change time: 09:49:38
   Signaling protocol: LDP, peer 80.168.0.42:0 up
     MPLS VC labels: local 130, remote 263
     Group ID: local 0, remote 0
     MTU: local 1500, remote 1500
     Remote interface description: testA
   Sequencing: receive disabled, send disabled
   VC statistics:
     packet totals: receive 0, send 141
     byte totals:   receive 0, send 15510
     packet drops:  receive 0, seq error 0, send 0