[c-nsp] ASA 5510 - 4GE SSM Problem

[Christian Zeng]

Hi,

since you use a 5510 - perhaps its an license issue? Base license only
supports 3 physical interfaces, according to

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/specs.html#wp1154752

Not sure how the SSM fits into the license picture.

At least a show version should tell you if the card is
installed/detected by the asa. If not, consider an software upgrade, I
remeber that when we installed the SSM, a firmware update to the
module happened (5540 running 7.2(2)).


Christian