[c-nsp] Dumb NPE-G2 SFP question

[Tassos Chatzithomaoglou]

You can try "show controllers gigabitethernet x/y

--
Tassos


Robert Boyle wrote on 17/8/2007 2:20 πμ:
> I have a 7206VXR with NPE-G2 with 3 SFPs at a remote location. I am 
> trying to get info from the SFPs to make sure they are the correct 
> type. Is there a command like:
> 
> sho idprom int g2/9
> 
> which can be used on the 7200? I have tried Google and Cisco's sites 
> without much luck. This is what I am looking for:
> 
>   Vendor Name       : FINISAR CORP.   Vendor OUI        : 0x0 0x90 
> 0x65 Vendor PN         : FWDM-1519-7D-47 Vendor rev        : 
> A   CC_BASE           : 0xD0
> 
> Something like that anyway. Thanks!
> 
> -Robert
> 
> Tellurian Networks - Global Hosting Solutions Since 1995
> http://www.tellurian.com | 888-TELLURIAN | 973-300-9211
> "Well done is better than well said." - Benjamin Franklin
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>