[c-nsp] Multiple T1 IMA / Channelized DS3

[OCOSA ListAcct]

Ok. I spoke with AT&T earlier they said that they have other customers 
taking some T1 IMAs over a channelized DS3 into the same router I was 
like how they said they would have a tech contact me I was ok. I thought 
maybe take the DS3 circuit into some sort of mux and split the signal 
from the IMA and send to a cross connect and then to the PA-A3-8T1IMA 
card....Can anyone shed some light here? Any help is appreciated!

Otis

Joe Freeman wrote:
> PA-MC-T3 cards won't do IMA.
>
> That said... Does anyone have any suggestions for scaling NxDS0 
> circuits muxed to ChDS3 in a 7206 chassis beyond 12 DS3's?
>
> Joe
>
> On 8/28/07, *OCOSA ListAcct* <listacc at ocosa.com 
> <mailto:listacc at ocosa.com>> wrote:
>
>     Has anyone took a channelized DS3 circuit using a (PA-MC-T3) and
>     place a
>     T1 IMA circuit for dsl aggregation on that same circuit filling up
>     four
>     full T1 slots? Would this be a layer 2 local switching setup on the
>     pa-mc-t3 card?
>
>     Otis
>
>
>     _______________________________________________
>     cisco-nsp mailing list  cisco-nsp at puck.nether.net
>     <mailto:cisco-nsp at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-nsp
>     archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>