[c-nsp] Multiple T1 IMA / Channelized DS3

Robert Blayzor rblayzor at inoc.net
Wed Aug 29 08:22:01 EDT 2007


OCOSA ListAcct wrote:
> Ok. I spoke with AT&T earlier they said that they have other customers 
> taking some T1 IMAs over a channelized DS3 into the same router I was 
> like how they said they would have a tech contact me I was ok. I thought 
> maybe take the DS3 circuit into some sort of mux and split the signal 
> from the IMA and send to a cross connect and then to the PA-A3-8T1IMA 
> card....Can anyone shed some light here? Any help is appreciated!


That doesn't mean that the router they are using is actually muxing the
DS3.  The 4 port T1 IMA card requires a physical interface, so how could
you take the channels out of the DS3 and get them to IMA?  You'll have
to use an external mux and feed the T1's back into the router.


-- 
Robert Blayzor
INOC
rblayzor at inoc.net
http://www.inoc.net/~rblayzor/

Life's unfair - but the root password helps!


More information about the cisco-nsp mailing list