[c-nsp] ME 6524 rate-limit

[Jay Young]

I have put an ME6524 (s6523-advipservicesk9-mz.122-18.ZU2.bin)  in to
replace a 7200 and one of the interfaces has a rate-limit. When I do a "show
int rate-limit" I see:

GigabitEthernet1/1.460
  Input
    matches: access-group 100
      params:  144696000 bps, 1048576 limit, 1048576 extended limit
      conformed 0 packets, 0 bytes; action: transmit
      exceeded 0 packets, 0 bytes; action: drop
      last packet: 1573927164ms ago, current burst: 0 bytes
      last cleared 00:51:24 ago, conformed 0 bps, exceeded 0 bps
  Output
    matches: access-group 101
      params:  144696000 bps, 1048576 limit, 1048576 extended limit
      conformed 0 packets, 0 bytes; action: transmit
      exceeded 0 packets, 0 bytes; action: drop
      last packet: 1573927164ms ago, current burst: 0 bytes
      last cleared 00:51:24 ago, conformed 0 bps, exceeded 0 bps


I know there is traffic that is matched by the acl, is this config
supported? Should I convert this to a policy map?

Thanks,
Jay