[c-nsp] shaping using policy-map on bridged interface

[Oliver Boehmer (oboehmer)]

Francois Corthésy <> wrote on Thursday, December 20, 2007 2:39 PM:

> Hi all,
> 
> I was playing around with a 1841, and tried to do shaping using a
> policy-map on its interfaces in bridge mode.
> This setup works fine when the interfaces are routed, but as soon as I
> put them in a bridge group, no shaping takes place.

have you tried putting it onto the BVI? You need to apply QoS to the routed interface..

	oli