[c-nsp] EoMPLS - redunancy?

[Sean Watkins]

Hi,

If I build a EoMLPLS tunnel from say a 3750-M to 3750-3750, I basically
build commands like this:

3750-M A

!
Int loopback0
Ip address 1.2.1.3 255.255.255.255

interface FastEthernet1/0/1
 no switchport
 no ip address
 no cdp enable
 xconnect 1.2.1.4 1000 encapsulation mpls
 no clns route-cache


3750-M B
!
Int loopback0
Ip address 1.2.1.4 255.255.255.255

interface FastEthernet1/0/1
 no switchport
 no ip address
 no cdp enable
 xconnect 1.2.1.3 1000 encapsulation mpls
 no clns route-cache


Which works great.


If I wanted to replace the 3750-B, with a 2 3750s for redundancy, how
would that work? Is there anything in EoMPLS to specify say a second
peer?

Ie

Xconnect 1.2.1.3 1000 encapsulation mpls backup 1.2.1.5?

Sean







--
Sean Watkins
North Rock Communications
Phone: 441-540-4102