[c-nsp] P to P T1 timing issue?

Kienzle, John John.Kienzle at anadarko.com
Tue Jul 3 18:03:29 EDT 2007


 
It is a vwic 2mft t1-d1 card in a 3845 series router. CRC errors,
aborted packets and carrier transitions. The interface appears to stay
up, so does the controller port. 

Update - TAC is thinking we have a bad card after further review.

John Kienzle
Senior ITS Analyst


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Justin M.
Streiner
Sent: Tuesday, July 03, 2007 3:32 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] P to P T1 timing issue?

On Tue, 3 Jul 2007, Kienzle, John wrote:

> We are configuring our routers for a point to point T1 circuit.  We 
> are using a similar config as we have had in the past with T1's. The 
> problem we seem to be having is the connection goes up and down 
> continuously. In fact, it will be up for 20 seconds, down for 10 
> seconds, and then repeats. It seems like some kind of timing issue, 
> and after verifying no clocking from the Telco, we configured clocking

> on one router. That did not fix it. I believe our lead tech opened a 
> TAC case for assistance, just wanted to get your thoughts too, before 
> we schedule downtime to change out and try a different controller
card.

What kinds of errors are you seeing, both on the interface and on the
controller port?  Since you mentioned a T1 controller card, I'm assuming
you're using a 7200 or some other PA-based router?

jms
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
-----------------------------------------

Anadarko Confidentiality Notice:  
This electronic transmission and any attached documents or other
writings are intended only for the person or entity to which it is
addressed and may contain information that is privileged,
confidential or otherwise protected from disclosure.  If you have
received this communication in error, please immediately notify
sender by return e-mail and destroy the communication. Any
disclosure, copying, distribution or the taking of any action
concerning the contents of this communication or any attachments by
anyone other than the named recipient is strictly prohibited.


More information about the cisco-nsp mailing list