[c-nsp] Cisco IOS versions that support switchport?

Seth Mattinen sethm at rollernet.us
Tue Jun 26 21:16:02 EDT 2007


Hank Nussbacher wrote:
> On Tue, 26 Jun 2007, Pelle wrote:
>
>   
>> On Tue, Jun 26, 2007 at 11:16:39PM +0300, Hank Nussbacher wrote:
>>
>>     
>>> Where can I find a Cisco page that shows which IOS versions that
>>> support switchport capability (specifically for 871, 1841, 2501, 2514
>>> and 2610)?
>>>       
>> 871:  yes for the LAN-ports, no for the WAN port
>> 1841: yes, if equipped with a EtherSwitch-module, e.g. WIC-4ESW or
>>      HWIC-4ESW
>> 25xx: no
>> 2610: maybe, if equipped with the EtherSwitch-module WIC-4ESW and it's
>>      supported (don't know that)
>>
>> in general, all (H)WIC's which are branded as "Ethernet Switching
>> module" does "switchport". in addition the routers in the 87x series and
>> 180x is shipped with this module integrated.
>>     
>
> Thanks!  That helped a lot.  Too bad there is no Cisco page which details 
> all router models and their support of switchport as you did above.
>   

Forgot to mention that the 2600 will take a NM-16ESW module.
http://cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00801aca3e.html

Like I said, it's about the modules. =)

~Seth



More information about the cisco-nsp mailing list