[c-nsp] 7513 T3 Card Question

[Joseph Jackson]

Is there a intregrated CSU/DSU T1 interface for the 7200 series?  I hate
having to have DSU's all over the place.


Joseph
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
> Sent: Wednesday, March 28, 2007 8:16 AM
> To: 'Matt Addison'; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] 7513 T3 Card Question
> 
> Thanks Matt & Pete for the answers....
> 
> Another question would then become what device(s) are 
> recommended for T1
> aggregation?  I'm looking through Cisco's website and was 
> hoping even on a
> smaller router we could for 4 or 8 T1's and just use smaller 
> routers in
> general ... we *really* want intregrated CSU/DSU ....
> 
> Price is an issue of course too... just wondering what others 
> are using
> besides 7513's for this application? ;)
> 
> Paul
>  
> 
> -----Original Message-----
> From: Matt Addison [mailto:maddison at iquest.net] 
> Sent: Wednesday, March 28, 2007 11:00 AM
> To: Paul Stewart; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] 7513 T3 Card Question
> 
> Regular PA-T3+ cards will not work, you want to be looking at 
> PA-MC-2T3+
> cards (multichannel, lets you set up serial interfaces for 
> individual T1s in
> the DS3). PA-T3+ cards will only let you terminate a single 
> full or subrate
> DS3.
>  
> ~Matt
> 
> ________________________________
> 
> From: cisco-nsp-bounces at puck.nether.net on behalf of Paul Stewart
> Sent: Wed 3/28/2007 10:42
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 7513 T3 Card Question
> 
> 
> 
> Hi folks...
> 
> We're looking at an application whereby providing T1 services out to
> customers... since we have a spare 7513 chassis kicking 
> around it makes
> sense to use it....
> 
> One concept is to put a pair of PA-T3+ cards into the chassis 
> and connect
> the T3's into a Telco Systems DS3 MUX - we're looking at 
> 40-50 full rate T1
> customers some of which will be load balanced as well.....
> 
> First question, will this work?  Second question, the 7513 
> only has VIP2-50
> cards in it and I read some Cisco docs that state minimum 
> RSP7000 series
> processors and ours have RSP5000 series....
> 
> Looking for real-world feedback... other option is to just 
> use 8 port T1
> cards (PA-MC-8T1) which seems like a safer bet at this point....
> 
> Thanks in advance,
> 
> Paul
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>