[c-nsp] Cisco 2960 QOS issue

[Dimuthu Parussalla]

Bob,

I have tried that on a out going port 24. But it doesn't show the marked
packet getting marked. I can see few packets with DSCP set. I tried
uploading 1Gig file to the test server but I only saw few packets getting
marked.

Nothing shows up in debug either (deb mls qos)



Refer to the output below.


#sh mls qos int g0/24 stat
GigabitEthernet0/24

  dscp: incoming
-------------------------------

  0 -  4 :     1461781            0            0            0            0
  5 -  9 :           0            0            0            0            0
 10 - 14 :           0            0            0            0            0
 15 - 19 :           0            0            0            0            0
 20 - 24 :           0            0            0            0            0
 25 - 29 :           0            0            0            0            0
 30 - 34 :           0            0            0            0            0
 35 - 39 :           0            0            0            0            0
 40 - 44 :           0            0            0            0            0
 45 - 49 :           0            0            0            0            0
 50 - 54 :           0            0            0            0            0
 55 - 59 :           0            0            0            0            0
 60 - 64 :           0            0            0            0
  dscp: outgoing
-------------------------------

  0 -  4 :      901695            0            0            0            0
  5 -  9 :           0            0            0            0            0
 10 - 14 :           0            0            0            0            0
 15 - 19 :           0            0            0            0            0
 20 - 24 :           0            0            0            0            0
 25 - 29 :           0            0            0            0            0
 30 - 34 :           0            0            0            0            0
 35 - 39 :           0            0            0            0            0
 40 - 44 :         146            0            0            0            0
 45 - 49 :           0            0            0            0            0
 50 - 54 :           0            0            0            0            0
 55 - 59 :           0            0            0            0            0
 60 - 64 :           0            0            0            0
  cos: incoming
-------------------------------

  0 -  4 :     1470387            0            0            0            0
  5 -  7 :           0            0            0
  cos: outgoing
-------------------------------

  0 -  4 :      904417            0            0            0            0
  5 -  7 :         146            0        15485
Policer: Inprofile:            0 OutofProfile:            0



-----Original Message-----
From: Bob Sinclair [mailto:bob at bobsinclair.net]
Sent: Monday, 14 May 2007 9:40 AM
To: dparussalla at baysidegrp.com.au
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Cisco 2960 QOS issue


Dimuthu Parussalla wrote:
> Hi All,
>
> I am having trouble marking packets on a ingress interface. It seems like
> policy doesn't mark the traffic related to access list. I have a test
access
> list set to mark DSCP 40 on all the ftp traffic. I can't even see matching
> traffic to my access list via sh acceess-lists.
>
> What I am doing wrong?.
>
Dimuthu,

These switches do not display hit counts on ACLs or sh policy-map
interface.  Try "sh mls qos int statistics" for the OUTgoing port, or on
a downstream router.  I  believe the stats are collected before the set.


--
Hth,

Bob Sinclair CCIE 10427 CCSI 30427
www.netmasterclass.net