[c-nsp] SPA-2XGE vs SPA-2X1GE-V2

[Ivan Gasparik]

hi,

both SPA's are supported in SIP-400, but SPA-2X1GE-V2 works only 
inside 7600 chassis. it's not supported in 6500's.
this quite important information you can only find in release notes to 
12.2SR:
http://cisco.com/en/US/products/ps6922/prod_release_note09186a00806c096f.html

ivan



On Sunday 18 November 2007, Arie Vayner (avayner) wrote:
> Tim,
>
> Take a look here:
> http://www.cisco.com/en/US/partner/products/hw/routers/ps368/produc
>ts_da ta_sheet0900aecd8027c9e6.html
>
> It can support both SPA:
> * 2-port 1 GE SPA (V1 and V2)
>
> For the V2 SPA's take a look here:
> http://www.cisco.com/en/US/partner/products/hw/routers/ps368/produc
>ts_da ta_sheet0900aecd804d884d.html
>
> For the V1 SPA's take a look here:
> http://www.cisco.com/en/US/partner/products/ps6267/products_data_sh
>eet09 00aecd80351ee0.html
>
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tim Durack
> Sent: Friday, November 16, 2007 20:01 PM
> To: Cisco-nsp
> Subject: [c-nsp] SPA-2XGE vs SPA-2X1GE-V2
>
> Anyone know what the difference is between the SPA-2XGE and the
> SPA-2X1GE-V2?
>
> Will both work in a 6500/SIP-400 combo? I'm assuming yes, but can't
> find any docs that indicate the differences if any.
>
> Thanks,
>
> Tim:>